Trolling Motor Connectors 12 Volt, Socket/Plug

Trolling Motor Connectors 12 Volt, Socket/Plug The socket is designed to be flush-mounted in the bow of the boat, to make connection of your trolling motor quick and easy. Wire the plug to the motor end, and some heavy gauge cable from the battery to the socket, and you?re ready to go. Includes butt connectors.

FW54 FB Digital 42" Trolling Motor

FW54 FB Digital 42" Trolling Motor The future is here, the Digital Guardian is a self-contained, sealed module in the lower unit controlling speed and monitoring vital motor components together in one protected location, eliminating the sonar interference commonly associated with analog circuit boards. These motors are based on simplicity and built for durability. The Digital Guardian is completely sealed in an epoxy module and fully protected in the lower unit.

Trolling Motor Plug Female 12V

Trolling Motor Plug Female 12V WH10530Female Motor Side Plug6" length12 Volt w/ Butt Connector8 GA.

Trolling Motor Transducer - 200Khz 14Deg

Trolling Motor Transducer - 200Khz 14Deg Plastic trolling motor transducer with depth and temp. Operating frequency of 200 kHz. Beamwidth of 14 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully so you don't mangle your boat in the process.

Vector 55 36" Transom Mount Trolling Motor

Vector 55 36" Transom Mount Trolling Motor Taking boat control in a new directionNew for 2004 the Vector series of transom mount trolling motors gives you control like never before. Tilt steering control with telescoping handle, Instant backtroll, Maximizer, lighted directional indicator, and push to test battery meter. This new series gives you more control, more time on the water, and a great ability to find the fish.p>Vector 55
Thrust : 55
Volts : 12
Shaft length : 36"
32 lbs.

Dual 82 Lbs. Thrust Trolling Motor Kit

Dual 82 Lbs. Thrust Trolling Motor Kit The Lenco Drive 164 is the most powerful, best handling and most user friendly trolling motor system ever developed. The system utilizes two 82lb thrust digital trolling motors mounted to the transom, and incorporates a digital, infinite variable speed foot pedal to operate both motors in unison, for a total of 164 pounds of forward and reverse thrust. The motors are extremely corrosion resistant, and mounted in 7-gauge electro-polished stainless steel housings. The anti-cavitation feature helps the motors remain silent in rough or shallow waters. Only 4 inches of width and 13 inches of height (per side) are required to mount the motors, and everything you need (excluding batteries) is included with the kit. Each kit is pre-assembled and contains two (2) extreme duty 2 1/4 stroke actuators, two (2) 24 volt trolling motors with prop's, digital control box, foot pedal, anti-cavitation plates, all mounting hardware and complete instructions. Lenco Drive Trolling Motor Sh. Wt. 70 lbs.

Fw46/FB 42" Trolling Motor

Fw46/FB 42" Trolling Motor The future is here, the Digital Guardian is a self-contained, sealed module in the lower unit controlling speed and monitoring vital motor components together in one protected location, eliminating the sonar interference commonly associated with analog circuit boards. These motors are based on simplicity and built for durability. The Digital Guardian is completely sealed in an epoxy module and fully protected in the lower unit.

Edge 40/L&D/Foot 50" Bow Mount Trolling Motor

Edge 40/L&D/Foot 50" Bow Mount Trolling Motor Edge foot control models are quipped with our highly responsive foot pedal for the ultimate in control, along with a host of other "Advantage Minn Kota" features.